CMR Racing Products Inc. > Road Racing Frames

Road Racing Frames from CMR Racing Products Inc.

YAMAHA TZ250/350 F & G MODEL:

We started in 2007 by reproducing the Harris Yamaha TZ250/350 GP Low-line Special frame, swing-arm and tank kit. The Low-line frame is not a replica of the original Yamaha frame, so the stock tank cannot be used. On the Low-line the gas-tank sits approximately 2 inches lower than the stock tank, and the frame tube layout is quite different to stock. Harris delivered the original frame from which these replicas were made to Canadian John Davis at Daytona in February of 1980. See the original spec sheet.

The earlier Harris Yamaha TZ 250/350 frames were made to fit the original Yamaha gas-tank and the original Yamaha aluminum cantilever swing-arm.

We have supplied a number of the above CMR kits around the world already with the owners being very happy with their results. See our Testimonials Page to read racers comments.

The CMR Replica Harris Yamaha TZ350GP Low-line Special frame, swing-arm and tank kits obtained eligibility for Forgotten Era Racing (FRC) competition in the U.K. See FRC Approval letter. Forgotten Era Racing is now part of the ICGP Racing series in Europe. ICGP approval has been granted.

See Photos

TZ Yamaha with CMR Frame, raced by Steve Shaw at Barber 2007
See more photos of the CMR Replica Harris Yamaha TZ350 GP Lowline Special frame

CMR DRIXTON REPLICAS

Marly Drixl was a Swiss engineer who appeared on the European racing scene in the mid to late 1960's. Drixol produced a number of very original frame packages for Aermacchi, in conjunction with British motorcycle racing entrepreneur Sid Lawton. Drixl's main claim to fame was a design for the Honda CB450 twin (the Black Bomber) which Honda launched in 1965. DRIXTON was an amalgamation of the names Drixl and Lawton. Records show that Drixl made only three or four copies of the CB450 Honda engined Drixton, but this machine handled so well that many people copied it. Drixl set a standard that still works today. CMR Drixton Replicas carry on that proud tradition.

CMR DRIXTON FRAME AND TANK KITS ARE NOW AVAILABLE FOR AN EXPANDED LINE OF ENGINES CMR produce replicas of the Drixton frame kit for the Honda CB350 twin and the CB450/500 Honda twins.

CMR DRIXTON FRAME AND TANK KITS ARE NOW AVAILABLE FOR AN EXPANDED LINE OF ENGINES
CMR produce replicas of the Drixton frame kit for the Honda CB350 twin and the CB450/500 Honda twins. See more photos

. We are now able to offer this frame kit for use with the Yamaha XS650/750 vertical twin engine. Several have been shipped to customers.

CMR Drixton replica frame Yamaha XS650 CMR Drixton replica Yamaha XS650

We are also in process of fitting a CB350/400 Honda 4-cylinder engine into the CMR Drixton for a customer's road and track motorcycle. Photos will be posted about this conversion soon.

Honda CB350 Drixton Replica CMR Frame
See more photos of the CB350 Drixton Replica CMR Frame

YAMAHA TZ 750 D-F MODEL:

There has been a resurgence of interest in running the big four cylinder Yamahas thanks in no small part to Rusty Bigley. We are now starting production of these frame kits so check with us soon.

SUZUKI TR/XR 750 1974/5 (lay down shock) MODEL:

Since big bore, multi cylinder two stroke machines are making a come-back, we have been hard at work developing a reproduction of the TR750 Suzuki twin shock frame, swing-arm and tank as it appears on the Australian website http://www.ozebook.com/compendium/tr750/tr750_models/tr750models.htm website. The Suzuki GT750 'Water Buffalo' engine will drop right in. These are being produced now, so contact us for your requirements.

SUZUKI TR/XR 750 1974/5 (lay down shock) Frame Kit
More photos coming soon

KAWASAKI H2R 750 1974/5 (lay down shock) MODEL:

Another multi-cylinder two stroke frame kit also nearing completion.

DUCATI:

Many Ducati people in Canada and the USA are telling us to look at Ducati TT2 Replica frame, swing-arm and tank kits using Ducati and Harris period geometry. If you are interested please contact us soon.

PROJECT BIKES:

We have been involved in several project bikes where big single four stroke engines have been fitted into TZ cycle parts. If you are interested please contact us.

Doug Forbes project bike, 1981 Yamaha TZ 250 H with a Yamaha XT600 motor
Yamaha XT600 motor in a TZ250 H model chassis

For more information please e-mail CMR Racing Products Denis@cmrracingproducts.com

This website is designed, hosted and promoted for CMR Racing Products Inc. by AGWebServices.com